Spooky Cycles

If you follow this blog, you know that I formerly had a “top of the line” major manufacturer carbon aero road bike, fully kitted out, that I recently sold.  You also know that I had a “top of the line” custom manufactured titanium gravel/allroad/CX bike, fully kitted out, that I recently sold.

Heck, if you’ve been around for a while, you know I had a fully built carbon fatbike and a full-custom, top of the line carbon full-suspension mountain bike that I had sold a while ago.  And when I sold those two bikes, I replaced them with a Horsethief with two sets of wheels.  In a lot of ways, that should tell you what’s going on now.

The Moots and Madone are gone, and in their stead, a Spooky in my shed.

Screen Shot 2016-08-29 at 9.25.04 PM

You’re maybe thinking, what’s a Spooky?  Click through to find out.

Or maybe you know that they’re handbuilt aluminum frames and you’re thinking…what?  He sold a Madone 7 and a Moots to get an aluminum frame?

In a word, yes.

So what’s the rationale?  Well, there are a host of reasons.

Let’s start with why there’s a change.  I find myself no longer wanting to support Trek or Shimano.  Both of my bikes had Shimano DI2 drivetrains.  I’m finding that I set up my drop bar bikes with nearly identical dimensions over time…so the functional difference becomes tire size.  I have a road bike with skinnies, and a “gravel” bike with wider tires.  And I end up maintaining twice as many components, charging twice as many batteries, buying twice as many consumables, and spending a lot more time maintaining.

So why not keep the Moots and throw some road tires on it?

Well, as much as I loved the Moots: 1) it was a smidge small; and, 2) it only fit 35c tires in the rear.  Yes, you can get a Routt 45 that will fit 45s in the rear, but the chain stays grow an inch.  So you either get draggy chain stays, or minimal tire clearance.  I didn’t want to compromise.

I’m not a fan of carbon frames for gravel bikes.  I’ve seen them get ruined in a single ride, with mud rubbing on the stays.  I’m not a fan of steel (I’m not quite that retro).  I’m worried it will rust, and I know that it’s heavier, strength to strength.  I wasn’t ready to drop the coin on another custom titanium frame (and candidly, couldn’t find exactly what I wanted).  So I was looking for a corrosion resistant, non-carbon frame that was reasonably priced, had short chain stays, predictable geometry, a riding position that could excel for road and for long days in the saddle, and tire clearance for bigger tires–in the 38-40c range.  I wanted to be able to run a mid-size double crank and 11 speed rear end, because I’ve found that in group rides and prolonged slogs, I like having tighter spacing between my gearing than a wide-range 1×11 speed setup offers.  I wanted disc brakes front and rear because frankly, they’re better technology and don’t have downsides for my riding.  I wanted thru-axles, because they’re stiffer, stronger, and they make disc brake alignment more consistent.  I wanted a frame that could be built with the best components, and cover all duties.

Enter the Dune.

Screen Shot 2016-08-29 at 9.53.46 PM

(Photos courtesy of the Spooky website).

It checks all of the boxes.  When it’s all built up, I’ll provide more details on component spec and such, but there’s a lot more to my decision than just checking objective criteria.  I’m pretty up front on here: I recognize that as a consumer, I spend money on products and I can choose what companies I support.  Literally.  Given a choice, I’d rather support an awesome company.  If I have to pick between excellent product and excellent company, I tend to keep looking until I can find both.

With Spooky, I’m happy with what I’m supporting.  If you haven’t met Brandon, the guy behind the rebirth of Spooky, you should get to know him.  He’s a cyclist in the best possible way.  That means that he’s a father and husband first, and a cyclist when he can be, but the fact that he lives a real life doesn’t dilute his passion for riding and enjoying bikes.  He’s got an eye for design that I don’t have.  And he came up with a design and geometry that…well, it checks my boxes.

And then there’s the order process.  Ever order a custom Trek?  You can do it on their website.  Dream bike by drop-down menu.  It’s disheartening.  With Spooky, it was talking back and forth with the company owner.  He’d put in a call to the master fabricator/welder who was going to build this particular frame.  He’d provide direct responses.  He’d make recommendations on spec, and he’d communicate by GIF.

Yes.  He had me at GIFs.

You order a bike most places, and you don’t hear much about what happens between swiping the card and getting a box with a bike in it.  With Spooky, I’ve had the sense that Brandon is as excited as I am.

There were all of the messages back and forth with little updates.

There was the time that he was stalking FedEx drivers, waiting to get the frame from the welder.


The time when he sent me a picture of my frame, with some of its siblings, in the car en route to the anodizer.


And the “here’s the shop door that your frame is going into in order to be dipped…”


I can keep going.  Trust me.  I haven’t even started with the gifs.

In short, Brandon is the kind of guy that you want to do business with.  Spooky is the kind of design that you want to ride.  And when you see it…droolz.

Click through to read the full Spooky Series:

Spooky Cycles

Spooky Dune in Pictures

Spooky Dune: The Build

Spooky Dune: Gravel Bike Review

Spooky Dune: Road Bike Review


Shuttle Smith -Ride of a Lifetime in Santa Cruz, CA

A few weeks ago, I flew out to Santa Cruz to have some much needed R&R with the family, and also to see my bro Brendan, who has resettled in the bay area.  With beautiful Cali weather afoot and some terrain I had never seen or ridden, Brendan made the call over to Shuttle Smith for a ride up the mountain.

We picked up a bike for the day, and met Dave at a nearby bike shop / parking lot at the base of the Sequel Demonstration Forest.  He was fully set up with a 4wd pickup truck, bottles of water, and a world of knowledge.  (For larger groups, he also has a bus he can use for shuttling, but for the two of us, it was a more intimate setting).

We headed out from the parking lot, and the knowledge dump commenced.  It was a truly amazing day of biking (I’ll write about that sometime), but the trip to the mountain biking was an experience onto itself.

IMG_5301 Dave is part mountain biking historian, part tour-guide, part California enthusiast…and all awesome.  All along the way, he was pointing out both historic artifacts from the Sequel area (such as one of the oldest hotels in California, and the location that they used to keep the horses…or an incredibly rare albino Redwood tree) and locations of incredible significance in the development of mountain biking. For years, I’ve seen the videos taken in the “post office” dirt jump track, and I shed some online tears when it was destroyed to make room for development.  We got to see it in person.  I’ve seen the videos of amazing mountain bike and dirt jump riders and the crazy things that they can do with bicycles.  We went past their houses–past their personal jump tracks.  It was a ~30 minute drive, and every second of it was filled with incredible stories about the area, the history and the culture.  For just about every pivotal moment in the sport, Dave’s been there–or talked to the person that was.  He was truly a wealth of knowledge. In Illinois, the drive to somewhere to bike is rarely scenic.  In California, every second of the ride was.  Dave knew the best routes, and the best spots to stop and take in the scenery. IMG_5300 When we reached the top of the access road in the Demonstration Forest, Dave pointed out all of the possible trails in the vicinity and gave expert recommendations on suggested routing to maximize our ride time and minimize our suffering on the climbs.  He talked about current trail conditions (dry, dusty) and suggested lines that would maximize speed and control (stay high on the berms to avoid the loose dirt at the bottoms).  He talked about places to stop for a breather, and obstacles to avoid.  He talked about places to grab water, and places to hit for dinner after the ride.  In short, he gave us the expert lowdown on all things Santa Cruz Mountain biking. We happened to just work with Dave for one ride up the mountain…but if you’re so inclined, he’ll shuttle you back and forth up the mountain again and again and again, until you’re incapable of riding any further.  He was incredibly enthusiastic, police, and knowledgeable.  Overall, it was the best guided shuttle service I’ve ever used, and lead to one of the best days of riding I’ve ever had.

If you’re ever in that neck of the woods and have some time to get out on a bike, drop Dave a line and set up a shuttle ride.  You won’t regret it!IMG_5308

Madone and Moots for Sale

If you’re a regular reader here, you know of the two amazing bikes that I’ve put together over the years, with DI2, and carbon, and titanium, and awesomeness.  The Madone and the Moots.  Search the site and you’ll find pictures and stories galore.

They’re both for sale.


This is a 2014 Moots Routt–this was the first of the “new geometry” Moots, with a slightly lower BB height and a little slacker steering–the exact geometry that they went with on the current year’s model.

Drivetrain is Dura-Ace cranks with Ultegra Di2 shifting and Ultegra hydraulic brakes front/rear, with Shimano XT Ice rotors. BB is newly replaced Ultegra BB (because if you’ve run different Shimano BBs, you know that Ultegra are the best and last longer than their others).

Handlebars are 44cm ENVE compact road drop bars, stem is ENVE carbon stem, fork is ENVE disc-compatible CX fork.

Eriksen Ti Sweetpost.

Does not include saddle, pedals or bottle cages. Wheels shown in photograph are NOT included–it presently is sporting a nice set of unbranded Velocity wheels–they’re A23s without the brand labels on them.

There is some pedal rub on the cranks–Happy to post a current picture for an interested buyer.

This has all stops pulled. All the bells and whistles. As nice and as good as it gets. Contact me with any questions.

Will ship to CONUS.  $4750.



This is a 2013 Trek Madone, Project One 7 series. Features Quarq SRAM RED cranks with powermeter, ceramic bb, Shimano Ultegra DI2 2×11 drivetrain with 11-25 cassette, Bontrager XXX stem, ENVE Road Drop Bars (Compact, 44cm), ENVE 3.4 SES Disc wheels with DT240s hubs, Bontrager brakes, Continental GP4000S tires (25c).

Things shown in pictures that aren’t included: pedals, bottle cages, and saddle. I have a saddle I can throw on the bike, but frankly, this bike deserves a perfect saddle that you pick.

Full disclosure statements: there is a small chip in the paint in the drive-side chainstay. I haven’t used the power meter in about a year, and I’m sure it should be sent in to be calibrated.

That’s it. The wheels are from here in flatlandia–there’s no wear on them. They’re on the first set of ENVE brake pads…and I’ve always exclusively used ENVE pads on them. Each part was picked based upon extensive research for the best possible build in the world.

It’s been lovingly ridden and maintained, and I’m sorry to see it go, but all things must go at some point. Will ship to CONUS, in the original box (as I bought this new, and kept the original packaging).  $3750.